WELCOME TO  MOSES Rev devlop
                         ============================
 
              This Program is licensed for the exclusive use of
 
                               Ultramarine inc.
 
              Copying of this program or use  by  anyone  other
              than  an  employee  of  the  above  firm  without
              written  consent  of  Ultramarine   is   strictly
                                 prohibited.
 
 
 
                               +++ M A I N +++
                               ===============
 
 
>&title Test Of Twinbox Hinge Connection With Gdofs
>&dimen -dimen feet kips
>&device     -g_default device -oecho no
>&set num_modes = 10
>&set strp   := .false.
>&set gdof_n := .true.
>inmodel
    Time To perform Inmodel                         : CP=     0.08
>&apply @
>&instate -con twinbox 10 0 0
>&weight -compute twinbox 0. 32 129 129
>&status -h
>struc
                +++ S T R U C T U R A L   S O L U T I O N +++
                =============================================
 
 
>modes -num_ev 10 -no_fix
                         Extracting Modes of TWINBOX
                         ===========================
    Time To Generate Mass Data                      : CP=     0.01
    Time to Define Model Topology                   : CP=     0.00
    Time to Complete Nodal Masses                   : CP=     0.00
    Time to Define Stiffness Blocks                 : CP=     0.00
    Time to Form Element Matricies                  : CP=     0.00
   *** Warning: Fixing Zero On Diagonal Of Stiffness At *OR In Direction RY
   ========================================================================
     *** WARNING: Reactions May Be Incorrect And Other Problems May Occur
     ====================================================================
    Time to Form Global Stiffness Matrix            : CP=     0.00
    Time to Form Global Mass Matrix                 : CP=     0.00
          *** WARNING: 3.4 Sig. Figures Lost At *P4 In Direction RY
          =========================================================
    Time to Extract Modes                           : CP=     0.00
>end
                               +++ M A I N +++
                               ===============
 
 
>strpos
         +++ S T R U C T U R A L   P O S T - P R O C E S S I N G +++
         ===========================================================
 
 
>modes value
>end
                               +++ M A I N +++
                               ===============
 
 
>&describe body twinbox -gen 1
>&equi
       +++ C U R R E N T   S Y S T E M   C O N F I G U R A T I O N +++
       ===============================================================
 
   Process is DEFAULT: Units Are Degrees,  Feet, and  Kips Unless Specified
                    Location and Net Force at Body Origin
 
   Body                 X         Y         Z        RX        RY        RZ
 --------          --------- --------- --------- --------- --------- ---------
 TWINBOX  Location     -0.00      0.00    -10.00      0.00      0.00     -0.00
          N Force      -0.00      0.00     -0.00         0         0         0
 
 Equilibrium Converged in 2 Iterations
>&status -h
>&status config -h
>Hydro
                     +++ H Y D R O _ D Y N A M I C S +++
                     ===================================
 
 
>g_press -period 5 6 7 8 9 10 11 12 13 14  -heading 0
                 Setting Pressure Name for TWINBOX to TWINBOX
                 ============================================
    Time to Generate 36 Panels For T                : CP=     0.00
    Time For 3D Diff.   Panels, Freq. 1             : CP=     0.01
    Time For 3D Diff.   Panels, Freq. 2             : CP=     0.00
    Time For 3D Diff.   Panels, Freq. 3             : CP=     0.01
    Time For 3D Diff.   Panels, Freq. 4             : CP=     0.01
    Time For 3D Diff.   Panels, Freq. 5             : CP=     0.00
    Time For 3D Diff.   Panels, Freq. 6             : CP=     0.01
    Time For 3D Diff.   Panels, Freq. 7             : CP=     0.01
    Time For 3D Diff.   Panels, Freq. 8             : CP=     0.00
    Time For 3D Diff.   Panels, Freq. 9             : CP=     0.01
    Time For 3D Diff.   Panels, Freq. 10            : CP=     0.01
                  Setting Drift Name for TWINBOX to TWINBOX
                  =========================================
    Time to Sum Pressures For 36 Panels on TWINBOX  : CP=     0.00
    Time To Set Up Convolution For TWINBOX          : CP=     0.01
>end
                               +++ M A I N +++
                               ===============
 
 
>freq_resp
                 +++ F R E Q U E N C Y   R E S P O N S E +++
                 ===========================================
 
 
>rao
    Time To Compute RAOs                            : CP=     0.03
>&subtitle RAOs at *P4 With Gdofs
>fp_std *p4
>&subtitle RAOs at *OR With Gdofs
>fp_std *or
>&subtitle RAOs at *S1 With Gdofs
>fp_std *s1
>End
 
 
                      MOSES   Finished with  1 Warnings
                      =================================
                           CP Time             0.29
                           ========================
                           Total Units         0.29
                           ========================