WELCOME TO  MOSES Rev devlop
                         ============================
 
              This Program is licensed for the exclusive use of
 
                               Ultramarine inc.
 
              Copying of this program or use  by  anyone  other
              than  an  employee  of  the  above  firm  without
              written  consent  of  Ultramarine   is   strictly
                                 prohibited.
 
 
 
                               +++ M A I N +++
                               ===============
 
 
>&title Test Of Modes of a Beam
>&dimen -dimen feet kips
>&device     -g_default device -oecho no
>&pb_parm -c_mass
>&set num = 12
>&set num_mode = 10
>inmodel
 len = 16.66667
    Time To perform Inmodel                         : CP=     0.08
>&apply @ 0 temp 100
>&status
       +++ B U O Y A N C Y   A N D   W E I G H T   F O R   T E M P +++
       ===============================================================
 
   Process is DEFAULT: Units Are Degrees,  Feet, and  Kips Unless Specified
                     Results Are Reported In Body System
 
        Draft =     0.00 Roll Angle =     0.00 Pitch Angle =     0.00
 
                        Wet Radii Of Gyration About CG
 
                 K-X =     0.00 K-Y =     4.81 K-Z =     4.81
 
                          /-- Center of Gravity ---/  Sounding   % Full
       Name      Weight    ---X---  ---Y---  ---Z---  -------- --------
       ----------------  Part TEMP       ------------
       ELEMENTS      7.73     8.33     0.00    10.00
       ========  ========  =======  =======  =======
       Total         7.73     8.33     0.00    10.00
       Buoyancy      0.00     0.00     0.00     0.00
>struc
                +++ S T R U C T U R A L   S O L U T I O N +++
                =============================================
 
 
>modes -num_ev 10 -no_fix
                           Extracting Modes of TEMP
                           ========================
    Time To Generate Mass Data                      : CP=     0.00
    Time to Define Model Topology                   : CP=     0.00
    Time to Complete Nodal Masses                   : CP=     0.00
    Time to Define Stiffness Blocks                 : CP=     0.00
    Time to Form Element Matricies                  : CP=     0.01
    Time to Form Global Stiffness Matrix            : CP=     0.00
    Time to Form Global Mass Matrix                 : CP=     0.00
    Time to Extract Modes                           : CP=     0.00
>end
                               +++ M A I N +++
                               ===============
 
 
>strpos
         +++ S T R U C T U R A L   P O S T - P R O C E S S I N G +++
         ===========================================================
 
 
>modes value
>end
                               +++ M A I N +++
                               ===============
 
 
 
 
                          MOSES   Finished Normally
                          =========================
                           CP Time             0.14
                           ========================
                           Total Units         0.14
                           ========================