WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&device -oecho no >&dimen -dimen feet kips >inmodel Time To perform Inmodel : CP= 0.08 >&instate -condition 9 >&status +++ B U O Y A N C Y A N D W E I G H T F O R T B R G +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Draft = 9.00 Roll Angle = 0.00 Pitch Angle = 0.00 Wet Radii Of Gyration About CG K-X = 0.00 K-Y = 0.00 K-Z = 0.00 /-- Center of Gravity ---/ Sounding % Full Name Weight ---X--- ---Y--- ---Z--- -------- -------- ---------------- Part TBRG ------------ ======== ======== ======= ======= ======= Total 0.00 0.00 0.00 0.00 Buoyancy 23030.42 200.00 0.00 4.50 >&compartment -percent tank .25 >&weight -compute 5 32 .29*400 .29*400 >&status +++ B U O Y A N C Y A N D W E I G H T F O R T B R G +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Draft = 9.00 Roll Angle = 0.00 Pitch Angle = 0.00 Wet Radii Of Gyration About CG K-X = 31.96 K-Y = 115.93 K-Z = 115.93 GMT = -0.47 GML = -0.47 /-- Center of Gravity ---/ Sounding % Full Name Weight ---X--- ---Y--- ---Z--- -------- -------- ---------------- Part TBRG ------------ LOAD_GRO 22870.49 200.00 0.00 5.00 --- Contents --- TANK 159.93 200.00 0.00 0.03 0.06 0.25 ======== ======== ======= ======= ======= Total 23030.42 200.00 0.00 4.97 Buoyancy 23030.42 200.00 0.00 4.50 TANK CORRECT >&dcptime time to medit time to medit : CP= 0.02 >medit +++ M O D E L E D I T I N G +++ ================================= >~wire b_cat 4.19 -dep 500 -len 4000 -buoy 0 -wtpl .008 -b_tens 500 >connector sst ~wire *mla -anc 45 20 >connector sbs ~wire *mla -anc 90 20 >connector sbb ~wire *mld -anc 90 20 >connector sbo ~wire *mld -anc 135 20 >connector pst ~wire *mlb -anc -45 20 >connector pbs ~wire *mlb -anc -90 20 >connector pbb ~wire *mlc -anc -90 20 >connector pbo ~wire *mlc -anc -135 20 >end +++ M A I N +++ =============== >&connecto @ -a_tension 400 Moving Attachment of Connector PBB ================================== Moving Attachment of Connector PBO ================================== Moving Attachment of Connector PBS ================================== Moving Attachment of Connector PST ================================== Moving Attachment of Connector SBB ================================== Moving Attachment of Connector SBO ================================== Moving Attachment of Connector SBS ================================== Moving Attachment of Connector SST ================================== >hydro +++ H Y D R O _ D Y N A M I C S +++ =================================== >g_mdrift tbrg tbrg -md_type form Setting Drift Name for TBRG to TBRG =================================== >end +++ M A I N +++ =============== >&env -sea issc 90 40 6 >&status env +++ C U R R E N T E N V I R O N M E N T +++ ============================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Environment Name NONAME Observation Time = 500.0 Time Increment = 0.500 Time Offset = 0.0 Time Reinforce = 12000.0 S E A C O N D I T I O N -------------------------- Type = ISSC Hs = 40.00 Mean Period = 6.00 Gamma = 1.0 Dir = 90.0 S.Coe = 200 W I N D D A T A ----------------- 1 Hr. Wind Speed = 0.0 Knots, Direction = 0.0 Design Wind Based On ABS Rules Wind Height Variation Based on ABS Rules Wind is Static C U R R E N T D A T A ----------------------- DEPTH SPEED DIRECTION ------- ----- --------- 0.0 0.00 0.0 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -22870.49 0 4574098 0 Contents 0.00 0.00 -159.93 0 31986 0 Buoyancy 0.00 0.00 23030.42 0 -4606083 0 Wave Drift 0.00 -32.40 0.00 146 0 -6478 Inertia 0.00 32.17 530.82 -145 -106163 6434 Contents Inertia 0.00 0.23 3.71 0 -741 45 Flex. Connectors -0.00 0.00 -534.53 0 106907 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 >&status g_connector +++ C O N N E C T O R G E O M E T R Y +++ =========================================== Results in The Body System Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Length of /------------ Connection -------------/ Name Class Status First Seg. Body X Y Z -------- -------- -------- ---------- -------- --------- ---------- --------- PBB ~WIRE Active 4000.00 TBRG 0.00 -50.00 20.00 GROUND -0.00 -4020.17 -500.00 PBO ~WIRE Active 4000.00 TBRG 0.00 -50.00 20.00 GROUND -2807.33 -2857.33 -500.00 PBS ~WIRE Active 4000.00 TBRG 400.00 -50.00 20.00 GROUND 400.00 -4020.17 -500.00 PST ~WIRE Active 4000.00 TBRG 400.00 -50.00 20.00 GROUND 3207.33 -2857.33 -500.00 SBB ~WIRE Active 4000.00 TBRG 0.00 50.00 20.00 GROUND -0.00 4020.17 -500.00 SBO ~WIRE Active 4000.00 TBRG 0.00 50.00 20.00 GROUND -2807.33 2857.33 -500.00 SBS ~WIRE Active 4000.00 TBRG 400.00 50.00 20.00 GROUND 400.00 4020.17 -500.00 SST ~WIRE Active 4000.00 TBRG 400.00 50.00 20.00 GROUND 3207.33 2857.33 -500.00 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- PBB TBRG -0.0 -394.6 -66.8 0 0 0 400 PBO TBRG -279.0 -279.0 -66.8 0 0 0 400 PBS TBRG 0.0 -394.6 -66.8 0 0 0 400 PST TBRG 279.0 -279.0 -66.8 0 0 0 400 SBB TBRG -0.0 394.6 -66.8 0 0 0 400 SBO TBRG -279.0 279.0 -66.8 0 0 0 400 SBS TBRG 0.0 394.6 -66.8 0 0 0 400 SST TBRG 279.0 279.0 -66.8 0 0 0 400 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TBRG Location 0.00 0.00 -9.00 0.00 0.00 0.00 N Force -0.00 -32.40 -534.53 146 106907 -6478 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -22870.49 0 4574098 0 Contents 0.00 0.00 -159.93 0 31986 0 Buoyancy 0.00 0.00 23030.42 0 -4606083 0 Wave Drift 0.00 -32.40 0.00 146 0 -6478 Inertia 0.00 32.17 530.82 -145 -106163 6434 Contents Inertia 0.00 0.23 3.71 0 -741 45 Flex. Connectors -0.00 0.00 -534.53 0 106907 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 >&instate -move 0 20 -lines >hydro +++ H Y D R O _ D Y N A M I C S +++ =================================== >g_mdrift tbrg tbrg -md_type form Setting Drift Name for TBRG to TBRG|003 ======================================= >end +++ M A I N +++ =============== >&status spread +++ M O O R I N G S P R E A D +++ =================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Tension Tension / Length of /----- Heading ----/ Name Break St. First Seg. Body Local Global -------- ---------- ---------- ---------- -------- --------- ---------- PBB 388.27 0.77654 4020.02 TBRG 270.00 270.00 PBO 392.18 0.78436 4014.18 TBRG 225.20 225.20 PBS 388.27 0.77654 4020.02 TBRG 270.00 270.00 PST 392.16 0.78432 4014.18 TBRG 314.80 314.80 SBB 399.47 0.79895 3980.18 TBRG 90.00 90.00 SBO 399.68 0.79936 3986.01 TBRG 135.20 135.20 SBS 399.47 0.79895 3980.18 TBRG 90.00 90.00 SST 399.68 0.79936 3986.01 TBRG 44.80 44.80 force SST 279.6263 277.6343 -66.86995 anchor SST 3207.334 2857.335 -500 tension PBB 388.2684 PBO 392.1783 PBS 388.2684 PST 392.1579 SBB 399.4741 SBO \ 399.6789 SBS 399.4741 SST 399.6789 length PBB 4020.023 PBO 4014.176 PBS 4020.023 PST 4014.176 SBB 3980.18 SBO \ 3986.01 SBS 3980.18 SST 3986.01 horiz PBB 382.7672 PBO 386.6406 PBS 382.7672 PST 386.6203 SBB 393.8333 SBO \ 394.0453 SBS 393.8333 SST 394.0453 head PBB 270 PBO 225.2034 PBS 270 PST 314.7967 SBB 90 SBO 135.2048 SBS 90 \ SST 44.79519 g_head PBB 270 PBO 225.2034 PBS 270 PST 314.7967 SBB 90 SBO 135.2048 SBS 90 \ SST 44.79519 ratio PBB 0.7765378 PBO 0.7843576 PBS 0.7765378 PST 0.7843168 SBB \ 0.7989492 SBO 0.7993587 SBS 0.7989492 SST 0.7993587 >&conne @ -set_st nominal Setting Nominal Condition of Connector PBB ========================================== Setting Nominal Condition of Connector PBO ========================================== Setting Nominal Condition of Connector PBS ========================================== Setting Nominal Condition of Connector PST ========================================== Setting Nominal Condition of Connector SBB ========================================== Setting Nominal Condition of Connector SBO ========================================== Setting Nominal Condition of Connector SBS ========================================== Setting Nominal Condition of Connector SST ========================================== >&status g_connector +++ C O N N E C T O R G E O M E T R Y +++ =========================================== Results in The Body System Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Length of /------------ Connection -------------/ Name Class Status First Seg. Body X Y Z -------- -------- -------- ---------- -------- --------- ---------- --------- PBB ~WIRE Active 4020.02 TBRG 0.00 -50.00 20.00 GROUND -0.00 -4020.17 -500.00 PBO ~WIRE Active 4014.18 TBRG 0.00 -50.00 20.00 GROUND -2807.33 -2857.33 -500.00 PBS ~WIRE Active 4020.02 TBRG 400.00 -50.00 20.00 GROUND 400.00 -4020.17 -500.00 PST ~WIRE Active 4014.18 TBRG 400.00 -50.00 20.00 GROUND 3207.33 -2857.33 -500.00 SBB ~WIRE Active 3980.18 TBRG 0.00 50.00 20.00 GROUND -0.00 4020.17 -500.00 SBO ~WIRE Active 3986.01 TBRG 0.00 50.00 20.00 GROUND -2807.33 2857.33 -500.00 SBS ~WIRE Active 3980.18 TBRG 400.00 50.00 20.00 GROUND 400.00 4020.17 -500.00 SST ~WIRE Active 3986.01 TBRG 400.00 50.00 20.00 GROUND 3207.33 2857.33 -500.00 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- PBB TBRG -0.0 -382.8 -65.1 0 0 0 388 PBO TBRG -272.4 -274.4 -65.7 0 0 0 392 PBS TBRG 0.0 -382.8 -65.1 0 0 0 388 PST TBRG 272.4 -274.4 -65.7 0 0 0 392 SBB TBRG -0.0 393.8 -66.9 0 0 0 399 SBO TBRG -279.6 277.6 -66.9 0 0 0 400 SBS TBRG 0.0 393.8 -66.9 0 0 0 399 SST TBRG 279.6 277.6 -66.9 0 0 0 400 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TBRG Location 0.00 20.00 -9.00 0.00 0.00 0.00 N Force -0.01 -3.71 -529.13 -724 105825 -739 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -22870.49 0 4574098 0 Contents 0.00 0.00 -159.93 0 31986 0 Buoyancy 0.00 0.00 23030.42 0 -4606083 0 Wave Drift 0.00 -32.40 0.00 146 0 -6478 Inertia 0.01 3.66 525.45 721 -105089 730 Contents Inertia 0.00 0.05 3.67 3 -734 10 Flex. Connectors -0.01 28.69 -529.13 -869 105825 5739 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 >&status lines +++ M O O R I N G L I N E S +++ ================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Horiz. Length of Line on /----- Top ------/ /---- Anchor -----/ Name Distance First Seg Bottom Tension Ratio Hori Pull Vert Pull -------- --------- --------- --------- --------- --------- --------- --------- PBB 3990.17 4020.02 0.00 388.27 0.7765 382.77 32.97 PBO 3984.34 4014.18 0.00 392.18 0.7844 386.64 33.56 PBS 3990.17 4020.02 0.00 388.27 0.7765 382.77 32.97 PST 3984.34 4014.18 0.00 392.16 0.7843 386.62 33.56 SBB 3950.17 3980.18 0.00 399.47 0.7989 393.83 35.05 SBO 3956.05 3986.01 0.00 399.68 0.7994 394.05 34.98 SBS 3950.17 3980.18 0.00 399.47 0.7989 393.83 35.05 SST 3956.05 3986.01 0.00 399.68 0.7994 394.05 34.98 >&instate -move 0 20 -lines @ @ 200 >&status g_connector +++ C O N N E C T O R G E O M E T R Y +++ =========================================== Results in The Body System Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Length of /------------ Connection -------------/ Name Class Status First Seg. Body X Y Z -------- -------- -------- ---------- -------- --------- ---------- --------- PBB ~WIRE Active 4045.49 TBRG 0.00 -50.00 20.00 GROUND -0.00 -4020.17 -500.00 PBO ~WIRE Active 4033.75 TBRG 0.00 -50.00 20.00 GROUND -2807.33 -2857.33 -500.00 PBS ~WIRE Active 4045.49 TBRG 400.00 -50.00 20.00 GROUND 400.00 -4020.17 -500.00 PST ~WIRE Active 4033.75 TBRG 400.00 -50.00 20.00 GROUND 3207.33 -2857.33 -500.00 SBB ~WIRE Active 3965.21 TBRG 0.00 50.00 20.00 GROUND -0.00 4020.17 -500.00 SBO ~WIRE Active 3977.00 TBRG 0.00 50.00 20.00 GROUND -2807.33 2857.33 -500.00 SBS ~WIRE Active 3965.21 TBRG 400.00 50.00 20.00 GROUND 400.00 4020.17 -500.00 SST ~WIRE Active 3977.00 TBRG 400.00 50.00 20.00 GROUND 3207.33 2857.33 -500.00 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- PBB TBRG -0.0 -188.6 -40.3 0 0 0 193 PBO TBRG -134.3 -136.3 -40.6 0 0 0 196 PBS TBRG 0.0 -188.6 -40.3 0 0 0 193 PST TBRG 134.3 -136.2 -40.6 0 0 0 196 SBB TBRG -0.0 201.6 -42.1 0 0 0 206 SBO TBRG -143.0 141.0 -42.0 0 0 0 205 SBS TBRG 0.0 201.6 -42.1 0 0 0 206 SST TBRG 143.0 141.0 -42.0 0 0 0 205 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TBRG Location 0.00 40.00 -9.00 0.00 0.00 0.00 N Force 0.00 3.20 -330.08 -887 66016 642 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -22870.49 0 4574098 0 Contents 0.00 0.00 -159.93 0 31986 0 Buoyancy 0.00 0.00 23030.42 0 -4606083 0 Wave Drift 0.00 -32.40 0.00 146 0 -6478 Inertia -0.00 -3.21 327.79 884 -65557 -642 Contents Inertia -0.00 0.01 2.29 4 -457 1 Flex. Connectors 0.00 35.60 -330.08 -1032 66016 7121 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 >&status lines +++ M O O R I N G L I N E S +++ ================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Horiz. Length of Line on /----- Top ------/ /---- Anchor -----/ Name Distance First Seg Bottom Tension Ratio Hori Pull Vert Pull -------- --------- --------- --------- --------- --------- --------- --------- PBB 4010.17 4045.49 0.00 192.83 0.3857 188.58 7.91 PBO 3998.55 4033.75 0.00 195.61 0.3912 191.34 8.37 PBS 4010.17 4045.49 0.00 192.83 0.3857 188.58 7.91 PST 3998.55 4033.75 0.00 195.60 0.3912 191.33 8.37 SBB 3930.17 3965.21 0.00 205.99 0.4120 201.64 10.41 SBO 3941.99 3977.00 0.00 205.17 0.4104 200.83 10.18 SBS 3930.17 3965.21 0.00 205.99 0.4120 201.64 10.41 SST 3941.99 3977.00 0.00 205.18 0.4104 200.84 10.18 >&instate -locat 0 0 100 >&env >&status env +++ C U R R E N T E N V I R O N M E N T +++ ============================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Environment Name NONAME Observation Time = 500.0 Time Increment = 0.500 Time Offset = 0.0 Time Reinforce = 12000.0 S E A C O N D I T I O N -------------------------- None W I N D D A T A ----------------- 1 Hr. Wind Speed = 0.0 Knots, Direction = 0.0 Design Wind Based On ABS Rules Wind Height Variation Based on ABS Rules Wind is Static C U R R E N T D A T A ----------------------- DEPTH SPEED DIRECTION ------- ----- --------- 0.0 0.00 0.0 >medit +++ M O D E L E D I T I N G +++ ================================= >~tight h_cat 2 -len 400 >connector hsst ~tight *mla >connector hsbb ~tight *mld >connector hpst ~tight *mlb >connector hpbb ~tight *mlc >end +++ M A I N +++ =============== >&connecto @ -inact h@ -active Setting Activity Of HPBB To Inactive ======================================== Setting Activity Of HPST To Inactive ======================================== Setting Activity Of HSBB To Inactive ======================================== Setting Activity Of HSST To Inactive ======================================== Setting Activity Of PBB To Inactive ======================================== Setting Activity Of PBO To Inactive ======================================== Setting Activity Of PBS To Inactive ======================================== Setting Activity Of PST To Inactive ======================================== Setting Activity Of SBB To Inactive ======================================== Setting Activity Of SBO To Inactive ======================================== Setting Activity Of SBS To Inactive ======================================== Setting Activity Of SST To Inactive ======================================== Setting Activity Of HPBB To Active ====================================== Setting Activity Of HPST To Active ====================================== Setting Activity Of HSBB To Active ====================================== Setting Activity Of HSST To Active ====================================== >&connecto h@ -anchor 200 0 350 Moving Attachment of Connector HPBB =================================== Moving Attachment of Connector HPST =================================== Moving Attachment of Connector HSBB =================================== Moving Attachment of Connector HSST =================================== >&connector h@ -l_tension 4000 Changing Length of Connector HPBB ================================= Changing Length of Connector HPST ================================= Changing Length of Connector HSBB ================================= Changing Length of Connector HSST ================================= >&weight -define 8000 201 0 10 32 129 129 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -8000.00 0 1608000 0 Contents 0.00 0.00 -159.93 0 31985 0 Inertia -0.14 0.00 -3676.07 0 727369 0 Contents Inertia 0.14 0.00 -73.50 0 14545 0 Flex. Connectors 0.00 0.00 11909.49 0 -2381898 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 >&status g_connector +++ C O N N E C T O R G E O M E T R Y +++ =========================================== Results in The Body System Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Length of /------------ Connection -------------/ Name Class Status First Seg. Body X Y Z -------- -------- -------- ---------- -------- --------- ---------- --------- HPBB ~TIGHT Active 295.88 TBRG 0.00 -50.00 20.00 GROUND 200.00 0.00 350.00 HPST ~TIGHT Active 295.88 TBRG 400.00 -50.00 20.00 GROUND 200.00 0.00 350.00 HSBB ~TIGHT Active 295.88 TBRG 0.00 50.00 20.00 GROUND 200.00 0.00 350.00 HSST ~TIGHT Active 295.88 TBRG 400.00 50.00 20.00 GROUND 200.00 0.00 350.00 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- HPBB TBRG 2589.0 647.3 2977.4 0 0 0 3998 HPST TBRG -2589.0 647.3 2977.4 0 0 0 3998 HSBB TBRG 2589.0 -647.3 2977.4 0 0 0 3998 HSST TBRG -2589.0 -647.3 2977.4 0 0 0 3998 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TBRG Location 0.00 0.00 100.00 0.00 0.00 0.00 N Force 0.00 0.00 3749.57 0 -741913 0 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -8000.00 0 1608000 0 Contents 0.00 0.00 -159.93 0 31985 0 Inertia -0.14 0.00 -3676.07 0 727369 0 Contents Inertia 0.14 0.00 -73.50 0 14545 0 Flex. Connectors 0.00 0.00 11909.49 0 -2381898 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 >&instate -lines >&status g_connector +++ C O N N E C T O R G E O M E T R Y +++ =========================================== Results in The Body System Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Length of /------------ Connection -------------/ Name Class Status First Seg. Body X Y Z -------- -------- -------- ---------- -------- --------- ---------- --------- HPBB ~TIGHT Active 299.85 TBRG 0.00 -50.00 20.00 GROUND 200.00 0.00 350.00 HPST ~TIGHT Active 299.85 TBRG 400.00 -50.00 20.00 GROUND 200.00 0.00 350.00 HSBB ~TIGHT Active 299.85 TBRG 0.00 50.00 20.00 GROUND 200.00 0.00 350.00 HSST ~TIGHT Active 299.85 TBRG 400.00 50.00 20.00 GROUND 200.00 0.00 350.00 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- HPBB TBRG 1774.7 443.7 2040.9 0 0 0 2741 HPST TBRG -1774.7 443.7 2040.9 0 0 0 2741 HSBB TBRG 1774.7 -443.7 2040.9 0 0 0 2741 HSST TBRG -1774.7 -443.7 2040.9 0 0 0 2741 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TBRG Location 0.00 0.00 100.00 0.00 0.00 0.00 N Force 0.00 0.00 3.52 0 7296 0 >&status force +++ F O R C E S A C T I N G O N T B R G +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -8000.00 0 1608000 0 Contents 0.00 0.00 -159.93 0 31985 0 Inertia -0.09 0.00 -3.44 0 -7204 0 Contents Inertia 0.09 0.00 -0.08 0 -90 0 Flex. Connectors 0.00 0.00 8163.45 0 -1632689 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 MOSES Finished Normally ========================= CP Time 0.22 ======================== Total Units 0.22 ========================