WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&device -g_default device -oecho no >&dimen -dimen feet kips >inmodel Time To perform Inmodel : CP= 0.09 >&instate -locat w297 0.0 0.0 -14.0 -locat CPDECK 0.0 0.0 -14.0 >medit +++ M O D E L E D I T I N G +++ ================================= >cl_del ~tie@ ~col@ >~dsu gspr x 1e5 y 1e5 z 1e5 >connector dsu_1 ~dsu *dSupt1 *bSupt1 >connector dsu_2 ~dsu *dSupt2 *bSupt2 >connector dsu_3 ~dsu *dSupt3 *bSupt3 >connector dsu_4 ~dsu *dSupt4 *bSupt4 >connector dsu_5 ~dsu *dSupt5 *bSupt5 >connector dsu_6 ~dsu *dSupt6 *bSupt6 >end +++ M A I N +++ =============== >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- DSU_1 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_2 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_3 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_4 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_5 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_6 CPDECK -0.0 -0.0 -0.0 0 0 0 0 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- CPDECK Location 0.00 0.00 -14.00 0.00 0.00 0.00 N Force -0.00 -0.00 -2005.00 -2104 -77633 0 W297 Location 0.00 0.00 -14.00 0.00 0.00 0.00 N Force -0.00 -0.00 1998.67 2101 77668 0 >&status force +++ F O R C E S A C T I N G O N C P D E C K +++ ===================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -2005.00 -2104 -77633 0 Inertia 0.00 0.00 2005.00 2105 77634 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 -0.00 0 0 0 +++ F O R C E S A C T I N G O N W 2 9 7 +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -13467.70 2101 77668 0 Buoyancy -0.00 -0.00 15466.37 0 0 0 Inertia 1.34 -1.95 -1998.67 -2086 -77658 0 Added Inertia -1.34 1.95 0.00 -13 -8 0 ======= ======= ======= ======= ======= ======= Total 0.00 -0.00 0.00 0 0 0 >&instate -move w297 0.0 0.0 -.5 -move CPDECK 0.0 0.0 -.5 >medit +++ M O D E L E D I T I N G +++ ================================= >~lmu gspr c x 1e4 -len 3 >connector lmu_1 -euler +z ~lmu *ground1 *pile1 >connector lmu_2 -euler +z ~lmu *ground2 *pile2 >connector lmu_3 -euler +z ~lmu *ground3 *pile3 >connector lmu_4 -euler +z ~lmu *ground4 *pile4 >connector lmu_5 -euler +z ~lmu *ground5 *pile5 >connector lmu_6 -euler +z ~lmu *ground6 *pile6 >&data curves ct_length piston 0 1. >assembly winch winch_1 lmu_1 -vel piston >assembly winch winch_2 lmu_2 -vel piston >assembly winch winch_3 lmu_3 -vel piston >assembly winch winch_4 lmu_4 -vel piston >assembly winch winch_5 lmu_5 -vel piston >assembly winch winch_6 lmu_6 -vel piston >end +++ M A I N +++ =============== >&instate -locat w297 0.0 0.0 -11.0 -locat CPDECK 0.0 0.0 -11.0 >&weight -compute w297 5 32 129 129 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- DSU_1 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_2 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_3 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_4 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_5 CPDECK -0.0 -0.0 -0.0 0 0 0 0 DSU_6 CPDECK -0.0 -0.0 -0.0 0 0 0 0 LMU_1 GROUND 0.0 0.0 0.0 0 0 0 0 LMU_2 GROUND 0.0 0.0 0.0 0 0 0 0 LMU_3 GROUND 0.0 0.0 0.0 0 0 0 0 LMU_4 GROUND 0.0 0.0 0.0 0 0 0 0 LMU_5 GROUND 0.0 0.0 0.0 0 0 0 0 LMU_6 GROUND 0.0 0.0 0.0 0 0 0 0 >&status force +++ F O R C E S A C T I N G O N C P D E C K +++ ===================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -2005.00 -2104 -77633 0 Inertia 0.00 0.00 2005.00 2105 77634 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 -0.00 0 0 0 +++ F O R C E S A C T I N G O N W 2 9 7 +++ ================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.00 -11877.16 0 0 0 Buoyancy -0.00 -0.00 11877.16 0 0 0 Inertia -0.00 -0.00 -0.00 0 0 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 -0.00 0 0 0 >&equi +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- CPDECK Location -6.00 1.12 -11.51 -0.00 -0.03 -0.55 N Force 0.18 0.51 -1.51 -4 -7 -16 W297 Location -5.99 1.12 -11.51 -0.00 -0.03 -0.55 N Force -0.18 -0.51 1.50 3 8 17 *** WARNING: Equilibrium Did Not Converge in 51 Iterations ========================================================== >&connector winch@ -l_dynam piston -.05 Changing Properties of Winch WINCH_1 ==================================== Changing Properties of Winch WINCH_2 ==================================== Changing Properties of Winch WINCH_3 ==================================== Changing Properties of Winch WINCH_4 ==================================== Changing Properties of Winch WINCH_5 ==================================== Changing Properties of Winch WINCH_6 ==================================== >&env -time 60 .125 >tdom Saving Database at Time = 3.000 ================================== Saving Database at Time = 6.000 ================================== Saving Database at Time = 9.000 ================================== Saving Database at Time = 12.000 ================================== Saving Database at Time = 15.000 ================================== Saving Database at Time = 18.000 ================================== Saving Database at Time = 21.000 ================================== Saving Database at Time = 24.000 ================================== Saving Database at Time = 27.000 ================================== Saving Database at Time = 30.000 ================================== Saving Database at Time = 33.000 ================================== Saving Database at Time = 36.000 ================================== Saving Database at Time = 39.000 ================================== Saving Database at Time = 42.000 ================================== Saving Database at Time = 45.000 ================================== Saving Database at Time = 48.000 ================================== Saving Database at Time = 51.000 ================================== Saving Database at Time = 54.000 ================================== Saving Database at Time = 57.000 ================================== Simulation Terminated at Specified Time ======================================= Time For Time Domain : CP= 0.81 >prcpost +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >traj +++ D I S P O S I T I O N +++ ============================= >report location >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >confor lmu@ +++ D I S P O S I T I O N +++ ============================= >report >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >c_leng lmu@ +++ D I S P O S I T I O N +++ ============================= >report >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >end +++ M A I N +++ =============== MOSES Finished with 1 Warnings ================================= CP Time 1.14 ======================== Total Units 1.14 ========================