WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&device -g_default device -oecho no >&dimen -dimen feet kips >&title Verification of Natural Frequency >inmodel Time To perform Inmodel : CP= 0.07 >&instate -loc block 0 0 0 >medit +++ M O D E L E D I T I N G +++ ================================= >~SPR sl_elem 12 -len 100 -EMOD 1E1 -tab_lim 800 >connector moto ~spr *box *ground >END +++ M A I N +++ =============== >&status +++ B U O Y A N C Y A N D W E I G H T F O R B L O C K +++ ================================================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Draft = 0.00 Roll Angle = 0.00 Pitch Angle = 0.00 Wet Radii Of Gyration About CG K-X = 0.00 K-Y = 0.00 K-Z = 0.00 /-- Center of Gravity ---/ Sounding % Full Name Weight ---X--- ---Y--- ---Z--- -------- -------- ---------------- Part BLOCK ------------ LOAD_GRO 1000.00 0.00 0.00 0.00 ======== ======== ======= ======= ======= Total 1000.00 0.00 0.00 0.00 Buoyancy 0.00 0.00 0.00 0.00 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- BLOCK Location 0.00 0.00 0.00 0.00 0.00 0.00 N Force 0.00 0.00 -1000.00 0 0 0 >&instate -move block 0 0 10 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- BLOCK Location 0.00 0.00 10.00 0.00 0.00 0.00 N Force 0.00 0.00 -1113.10 0 0 0 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- MOTO BLOCK 0.0 0.0 -113.1 0 0 0 113 >&env none -time 100 .1 >tdom Saving Database at Time = 5.000 ================================== Saving Database at Time = 10.000 ================================== Saving Database at Time = 15.000 ================================== Saving Database at Time = 20.000 ================================== Saving Database at Time = 25.000 ================================== Saving Database at Time = 30.000 ================================== Saving Database at Time = 35.000 ================================== Saving Database at Time = 40.000 ================================== Saving Database at Time = 45.000 ================================== Saving Database at Time = 50.000 ================================== Saving Database at Time = 55.000 ================================== Saving Database at Time = 60.000 ================================== Saving Database at Time = 65.000 ================================== Saving Database at Time = 70.000 ================================== Saving Database at Time = 74.999 ================================== Saving Database at Time = 79.999 ================================== Saving Database at Time = 84.999 ================================== Saving Database at Time = 89.999 ================================== Saving Database at Time = 94.999 ================================== Simulation Terminated at Specified Time ======================================= Time For Time Domain : CP= 0.15 >prcpost +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >traj +++ D I S P O S I T I O N +++ ============================= >set_var mean -statistics 1 7 >statistics 1 7 +++ T I M E S T A T I S T I C S +++ ===================================== Z Description BLOCK -------------------- --------- Mean -89.48 Variance 4869.85 Root Mean Square 113.47 Std. Deviation 69.78 Skewness 0.02 Kurtosis -1.51 Number of Peaks 19 Av Of 1/3 Highest 9.95 Av Of 1/3 Lowest -186.79 Av Of 1/100 Highest 9.95 Av Of 1/100 Lowest -186.79 Av Of 1/1000 Highest 9.95 Av Of 1/1000 Lowest -186.79 Maximum 9.95 Minimum -186.79 Pred. Max 70.55 Pred. Min -246.10 Av Of 1/3 H-Mean 99.43 Av Of 1/3 L-Mean -97.31 Av Of 1/100 H-Mean 99.43 Av Of 1/100 L-Mean -97.32 Av Of 1/1000 H-Mean 99.43 Av Of 1/1000 L-Mean -97.32 Maximum - Mean 99.43 Minimum - Mean -97.32 Pred. Max-Mean 160.03 Pred. Min-Mean -156.62 -89.4788 4869.85 113.474 69.7843 1.90803E-2 -1.5064 19 9.95182 -186.792 \ 9.95476 -186.794 9.95476 -186.794 9.95476 -186.794 70.5494 -246.098 \ 99.4306 -97.3129 99.4336 -97.3152 99.4336 -97.3152 99.4336 -97.3152 \ 160.028 -156.619 >&set mean = -89.4788 >add "Mean" -input 1 0 -89.4788 100 -89.4788 >vl The Variables Available for Selection are: ========================================== 1 Event 10 RZ:BLOCK 18 A-X:BLOCK 2 Max. Const. Force 11 V-X:BLOCK 19 A-Y:BLOCK 3 Bot.Clear:BLOCK 12 V-Y:BLOCK 20 A-Z:BLOCK 4 Displ:BLOCK 13 V-Z:BLOCK 21 A-RX:BLOCK 5 X:BLOCK 14 V-RX:BLOCK 22 A-RY:BLOCK 6 Y:BLOCK 15 V-RY:BLOCK 23 A-RZ:BLOCK 7 Z:BLOCK 16 V-RZ:BLOCK 24 A-MAG:BLOCK 8 RX:BLOCK 17 V-MAG:BLOCK 25 MEAN 9 RY:BLOCK >&channel gra_dev -file spmass.ans/sm_mot.eps >plot 1 7 23 -clean -lim 0 100 -t_left "Z Location (ft)" -t_x "Time \ (Seconds)" -legend 1 "CG" -legend 2 "Mean" >report loc velo >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >end +++ M A I N +++ =============== MOSES Finished Normally ========================= CP Time 0.32 ======================== Total Units 0.32 ========================