WELCOME TO  MOSES Rev devlop
                         ============================
 
              This Program is licensed for the exclusive use of
 
                               Ultramarine inc.
 
              Copying of this program or use  by  anyone  other
              than  an  employee  of  the  above  firm  without
              written  consent  of  Ultramarine   is   strictly
                                 prohibited.
 
 
 
                               +++ M A I N +++
                               ===============
 
 
>inmodel
    Time To perform Inmodel                         : CP=     0.30
>&instate -cond 295
>&weight -compute 100 32 100 100
>&status config
       +++ C U R R E N T   S Y S T E M   C O N F I G U R A T I O N +++
       ===============================================================
 
   Process is DEFAULT: Units Are Degrees,  Feet, and  Kips Unless Specified
                    Location and Net Force at Body Origin
 
   Body                 X         Y         Z        RX        RY        RZ
 --------          --------- --------- --------- --------- --------- ---------
 SPAR     Location      0.00      0.00   -295.00      0.00      0.00      0.00
          N Force       0.00      0.00     -0.00         0         0         0
 
>&status force
              +++ F O R C E S   A C T I N G   O N   S P A R +++
              =================================================
 
   Process is DEFAULT: Units Are Degrees,  Feet, and  Kips Unless Specified
                     Results Are Reported In Body System
 
  Type of Force        X         Y         Z        MX        MY        MZ
------------------ --------- --------- --------- --------- --------- ---------
Weight                  0.00      0.00 -57326.21         0         0         0
Buoyancy                0.00      0.00  57326.21         0         0         0
Inertia                 0.00      0.00      0.00         0         0         0
                     =======   =======   =======   =======   =======   =======
Total                   0.00      0.00      0.00         0         0         0
>&event 1
>struct
                +++ S T R U C T U R A L   S O L U T I O N +++
                =============================================
 
 
>lcase -process 1
    Time To Generate Load Cases                     : CP=     0.03
>ssolve
                        Reducing Stiffness of DEFAULT
                        =============================
    Time to Define Model Topology                   : CP=     0.12
    Time to Complete Nodal Loads                    : CP=     0.01
    Time to Define Stiffness Blocks                 : CP=     0.01
    Time to Form Element Matricies                  : CP=     0.11
    Time to Form Global Stiffness Matrix            : CP=     0.01
    Time to Form Global Load Matrix                 : CP=     0.00
        *** WARNING: 3.0 Sig. Figures Lost At **IN0944 In Direction  Y
        ==============================================================
        *** WARNING: 3.0 Sig. Figures Lost At **IN0943 In Direction  Y
        ==============================================================
        *** WARNING: 3.9 Sig. Figures Lost At **S00479 In Direction  X
        ==============================================================
        *** WARNING: 4.0 Sig. Figures Lost At **S00479 In Direction  Y
        ==============================================================
        *** WARNING: 3.5 Sig. Figures Lost At **S00479 In Direction  Z
        ==============================================================
    Time to Factor Stiffness Matrix                 : CP=     0.13
                         Expanding Results of DEFAULT
                         ============================
    Time For Backward Substitution                  : CP=     0.00
    Time to Store Deflections                       : CP=     0.00
    Time to Store Element Internal Loads            : CP=     0.05
>end
                               +++ M A I N +++
                               ===============
 
 
>strpost
         +++ S T R U C T U R A L   P O S T - P R O C E S S I N G +++
         ===========================================================
 
 
>plate stress
>end
                               +++ M A I N +++
                               ===============
 
 
 
 
                          MOSES   Finished Normally
                          =========================
                           CP Time             0.93
                           ========================
                           Total Units         0.93
                           ========================