WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&device -g_default file -oecho n >&dimen -DIMEN FEET KIPS >&TITLE Two Block Upend Analysis >&default -depth 138.0 >inmodel -offset Time To perform Inmodel : CP= 0.11 >&apply -margin str@ 6 >&apply -percent @ 100 >&summary +++ & S U M M A R Y +++ ======================= >categ_sum >end +++ M A I N +++ =============== >&data environment +++ & D A T A +++ ================= >environment sea -sea issc 90 5 7 -use_mean yes >end_&data +++ M A I N +++ =============== >&describe process sidelift >&describe part jacket -move 0 0 0 *j403 *j103 *j401 *j101 >&instate -locate jacket 0 0 10 >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 0.00 0.00 10.00 0.00 0.00 0.00 N Force 0.00 0.00 -492.41 -150 33967 0 >medit +++ M O D E L E D I T I N G +++ ================================= >~bo1 sling 10 -length 200.00 -density 0.001 -emodulus 15000. >~ls3 sling 4 -length 157.31 -density 0.001 -emodulus 15000. >~ls1 sling 4 -length 140.20 -density 0.001 -emodulus 15000. >&describe part ground >*mainhk 0 0 250 -location 68.9819 0.3062656 24.35118 Location of *mainhk 68.9819 0.3062656 274.3512 >connector mainln ~bo1 *mainhk >connector ls305 ~ls3 *j305 >connector ls105 ~ls1 *j105 >assembly t-h_definition main mainln ls305 ls105 -init >end +++ M A I N +++ =============== >&picture iso >&status tip-hook -hard >&status f_connector -hard +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 0.12 1.25 5.70 -0.49 0.02 0.06 N Force -0.44 -2.49 2.09 96 -244 -172 Equilibrium Converged in 4 Iterations Event 1 Hook Load = 494.5291 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 0.08 -0.51 1.35 -0.38 -0.00 0.05 N Force -0.17 0.20 -0.93 -53 46 14 Equilibrium Converged in 4 Iterations Event 2 Hook Load = 491.4186 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location -0.11 -1.26 -2.89 -0.35 0.03 0.07 N Force 0.05 1.04 0.51 -39 509 75 Equilibrium Converged in 3 Iterations Event 3 Hook Load = 410.4787 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location -0.04 -0.18 -6.99 -0.71 0.14 0.13 N Force -0.55 0.01 -43.21 51 3014 1 Equilibrium Converged in 4 Iterations Event 4 Hook Load = 348.2589 >rpt +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 348.3 216.927 GROUND 68.97 0.00 394.95 HOOK 69.37 0.33 177.79 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is SIDELIFT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- LS105 JACKET 68.0 -2.0 131.2 0 0 0 148 LS305 JACKET -69.5 -2.8 217.0 0 0 0 228 MAINLN GROUND 0.7 0.5 -348.3 0 0 0 348 >postpro +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ M A I N +++ =============== >freq_response +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== >rao -period 5 6 7 8 9 10 11 -heading 90 Time To Compute RAOs : CP= 0.03 >fr_point RAOs Moved to X = 0.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= >report >end +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== >fr_cforce ls305 +++ D I S P O S I T I O N +++ ============================= >report >end +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== >st_cforce @ sea THE FOLLOWING DATA WILL BE USED =============================== Spectrum Type = ISSC Sign. Wave Height = 5.00 Mean Period = 7.00 Mean Heading = 90.00 Spreading Coef. = 200.00 Statistics = MAX +++ D I S P O S I T I O N +++ ============================= >report >end +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== >end +++ M A I N +++ =============== >&describe process upend >medit +++ M O D E L E D I T I N G +++ ================================= >~bo2 sling 10 -length 600.00 -density 0.001 -emodulus 15000. >~usl sling 4 -length 100 -emod 15000. >&describe part ground >*auxhk 10 0 10 -reference *mainhk Location of *auxhk = 78.96508 0 404.9511 >connector auxln ~bo2 *auxhk >connector us401 ~usl *j401 >connector us403 ~usl *j403 >connector us405 ~usl *j405 >assembly t-h_definition up auxln us401 us403 us405 -initial >end +++ M A I N +++ =============== >&set stit = Initial Position Initial Position ================ >&set J = 0 >new_pos 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location -0.68 -0.79 -7.37 -0.49 0.04 0.12 N Force -0.00 0.27 0.14 -8 -26 18 Equilibrium Converged in 6 Iterations Event 0, Pitch Angle = 0.04 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 385.0 217.162 GROUND 68.97 0.00 394.95 HOOK 68.42 -0.15 177.53 UP 5.7 319.698 GROUND 78.97 0.00 404.95 HOOK 133.03 0.33 89.85 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 1.0 0.0 -5.6 0 0 0 6 LS105 JACKET 76.6 -1.3 147.9 0 0 0 167 LS305 JACKET -75.9 -1.7 237.1 0 0 0 249 MAINLN GROUND -1.0 -0.3 -385.0 0 0 0 385 US401 JACKET -0.5 0.4 2.7 0 0 0 3 US403 JACKET -0.5 -0.5 3.0 0 0 0 3 US405 JACKET 0.0 0.0 0.0 0 0 0 0 >&set stit = Rotating Stage Rotating Stage ============== >&set inc = 10 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 5.83 -0.85 -33.52 -0.48 -9.93 0.15 N Force -1.30 0.04 1.15 -10 -140 4 Equilibrium Converged in 5 Iterations Event 1, Pitch Angle = -9.93 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 204.1 235.808 GROUND 68.97 0.00 394.95 HOOK 41.88 -0.22 160.55 UP 139.2 320.471 GROUND 78.97 0.00 404.95 HOOK 136.32 0.32 89.57 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 24.9 0.1 -137.0 0 0 0 139 LS105 JACKET 74.6 -1.2 144.0 0 0 0 162 LS305 JACKET -16.5 -0.3 51.7 0 0 0 54 MAINLN GROUND -23.4 -0.2 -202.8 0 0 0 204 US401 JACKET -0.4 10.4 65.7 0 0 0 67 US403 JACKET -0.5 -11.7 73.5 0 0 0 74 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 10.74 -0.52 -57.29 -0.43 -19.17 -0.17 N Force -1.68 0.06 3.97 -5 -349 8 Equilibrium Converged in 8 Iterations Event 2, Pitch Angle = -19.17 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 140.6 260.193 GROUND 68.97 0.00 394.95 HOOK 20.97 -0.02 139.08 UP 163.6 320.546 GROUND 78.97 0.00 404.95 HOOK 135.43 -0.17 89.32 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 28.8 -0.1 -161.1 0 0 0 164 LS105 JACKET 69.9 -0.8 122.0 0 0 0 141 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -25.9 -0.0 -138.2 0 0 0 141 US401 JACKET 12.2 12.4 77.0 0 0 0 79 US403 JACKET 13.4 -13.6 84.5 0 0 0 87 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 17.26 -0.50 -78.81 -0.47 -28.21 -0.09 N Force -1.06 -0.08 3.82 5 -342 -6 Equilibrium Converged in 10 Iterations Event 3, Pitch Angle = -28.21 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 131.2 284.940 GROUND 68.97 0.00 394.95 HOOK 17.80 0.02 114.51 UP 155.4 319.857 GROUND 78.97 0.00 404.95 HOOK 133.10 0.08 89.62 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 26.3 0.0 -153.2 0 0 0 155 LS105 JACKET 81.8 -0.8 102.6 0 0 0 131 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -23.6 0.0 -129.1 0 0 0 131 US401 JACKET 23.3 11.7 69.9 0 0 0 75 US403 JACKET 25.9 -13.0 77.5 0 0 0 83 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 26.65 -0.51 -97.83 -0.44 -37.24 -0.02 N Force -0.40 -0.08 4.21 0 -354 -4 Equilibrium Converged in 13 Iterations Event 4, Pitch Angle = -37.24 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 128.6 307.971 GROUND 68.97 0.00 394.95 HOOK 17.20 -0.02 91.23 UP 151.4 318.407 GROUND 78.97 0.00 404.95 HOOK 130.44 0.13 90.65 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 24.5 0.1 -149.5 0 0 0 151 LS105 JACKET 93.9 -0.7 87.9 0 0 0 129 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -21.6 -0.0 -126.8 0 0 0 129 US401 JACKET 33.8 11.5 63.8 0 0 0 73 US403 JACKET 37.1 -12.6 70.0 0 0 0 80 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 38.04 -0.59 -113.87 -0.50 -46.21 0.05 N Force 0.15 -0.10 5.48 4 -447 -8 Equilibrium Converged in 11 Iterations Event 5, Pitch Angle = -46.21 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 126.8 328.882 GROUND 68.97 0.00 394.95 HOOK 18.86 -0.07 69.77 UP 152.2 316.235 GROUND 78.97 0.00 404.95 HOOK 127.10 0.18 92.32 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 23.2 0.1 -150.4 0 0 0 152 LS105 JACKET 103.8 -0.6 72.8 0 0 0 127 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -19.3 -0.0 -125.3 0 0 0 127 US401 JACKET 44.1 11.5 57.6 0 0 0 74 US403 JACKET 48.4 -12.7 63.2 0 0 0 81 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 48.62 -0.63 -126.50 -0.55 -54.89 0.23 N Force 1.03 -0.14 5.55 4 -430 -10 Equilibrium Converged in 17 Iterations Event 6, Pitch Angle = -54.89 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 124.1 347.337 GROUND 68.97 0.00 394.95 HOOK 21.07 -0.16 50.80 UP 154.5 313.402 GROUND 78.97 0.00 404.95 HOOK 121.67 0.32 94.39 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 21.1 0.2 -153.1 0 0 0 155 LS105 JACKET 110.4 -0.6 56.7 0 0 0 124 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -17.1 -0.1 -122.9 0 0 0 124 US401 JACKET 54.1 11.7 50.3 0 0 0 75 US403 JACKET 59.1 -12.8 55.0 0 0 0 82 US405 JACKET 0.0 0.0 0.0 0 0 0 0 >&set stit = Lifting for Clearance Lifting for Clearance ===================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 43.94 -1.04 -121.38 -0.61 -54.43 1.01 N Force 0.29 -0.20 2.99 17 -231 -39 Equilibrium Converged in 7 Iterations Event 7, Pitch Angle = -54.43 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 124.0 342.516 GROUND 68.97 0.00 394.95 HOOK 18.16 -0.86 56.09 UP 160.3 308.534 GROUND 78.97 0.00 404.95 HOOK 118.70 0.99 98.90 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 20.6 0.5 -159.0 0 0 0 160 LS105 JACKET 110.4 -0.6 56.4 0 0 0 124 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -18.4 -0.3 -122.6 0 0 0 124 US401 JACKET 55.6 12.1 51.8 0 0 0 77 US403 JACKET 61.7 -13.4 57.5 0 0 0 85 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 40.43 -0.75 -111.29 -0.58 -54.08 -0.14 N Force -0.15 0.13 1.31 -11 -104 26 Equilibrium Converged in 8 Iterations Event 8, Pitch Angle = -54.08 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 126.6 332.760 GROUND 68.97 0.00 394.95 HOOK 16.29 -0.02 66.25 UP 169.4 298.707 GROUND 78.97 0.00 404.95 HOOK 116.33 -0.25 108.50 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 21.2 -0.1 -168.1 0 0 0 169 LS105 JACKET 113.0 -0.5 57.1 0 0 0 127 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -20.0 -0.0 -125.1 0 0 0 127 US401 JACKET 59.4 12.9 55.6 0 0 0 82 US403 JACKET 64.3 -14.0 60.2 0 0 0 89 US405 JACKET 0.0 0.0 0.0 0 0 0 0 >&set stit = Rotating Again Rotating Again ============== >&describe body -ignore rz +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 48.95 -0.61 -116.59 -0.66 -58.69 -0.15 N Force 0.55 -0.06 3.58 5 -266 -6 Equilibrium Converged in 5 Iterations Event 9, Pitch Angle = -58.69 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 125.1 340.974 GROUND 68.97 0.00 394.95 HOOK 19.83 0.15 57.40 UP 171.0 297.118 GROUND 78.97 0.00 404.95 HOOK 115.11 -0.08 109.95 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 20.8 -0.0 -169.7 0 0 0 171 LS105 JACKET 115.2 -0.6 48.9 0 0 0 125 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -18.0 0.1 -123.8 0 0 0 125 US401 JACKET 64.1 13.0 50.6 0 0 0 83 US403 JACKET 70.1 -14.2 55.4 0 0 0 90 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 60.98 -0.61 -124.07 -0.78 -67.31 -0.20 N Force 1.32 -0.07 3.69 1 -259 1 Equilibrium Converged in 18 Iterations Event 10, Pitch Angle = -67.31 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 119.8 355.131 GROUND 68.97 0.00 394.95 HOOK 24.50 0.28 42.49 UP 175.2 293.459 GROUND 78.97 0.00 404.95 HOOK 108.94 -0.14 112.93 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 17.9 -0.1 -174.3 0 0 0 175 LS105 JACKET 115.4 -0.5 32.0 0 0 0 120 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -15.0 0.1 -118.9 0 0 0 120 US401 JACKET 73.9 13.4 40.2 0 0 0 85 US403 JACKET 80.0 -14.5 43.5 0 0 0 92 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 79.36 -0.69 -128.38 -1.25 -80.19 -0.45 N Force 1.83 -0.10 3.17 0 -204 24 Equilibrium Converged in 23 Iterations Event 11, Pitch Angle = -80.19 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- MAIN 105.1 370.594 GROUND 68.97 0.00 394.95 HOOK 33.86 0.79 25.91 UP 189.3 287.141 GROUND 78.97 0.00 404.95 HOOK 98.34 -0.33 118.37 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 12.8 -0.2 -188.9 0 0 0 189 LS105 JACKET 104.8 -0.3 8.0 0 0 0 105 LS305 JACKET 0.0 0.0 0.0 0 0 0 0 MAINLN GROUND -10.0 0.2 -104.6 0 0 0 105 US401 JACKET 89.3 14.6 21.7 0 0 0 93 US403 JACKET 94.6 -15.5 23.0 0 0 0 99 US405 JACKET 0.0 0.0 0.0 0 0 0 0 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 100.81 -0.10 -122.44 -178.54 -85.77 179.35 N Force 1.14 -0.06 1.73 5 -143 42 Equilibrium Converged in 34 Iterations >&describe body -ignore >&set stit = Release Lowering Sling Release Lowering Sling ====================== >&connector main -inactive Setting Activity Of LS105 To Inactive ======================================== Setting Activity Of LS305 To Inactive ======================================== Setting Activity Of MAIN To Inactive ======================================== Setting Activity Of MAINLN To Inactive ======================================== >&instate -move -sl >new_pos 0 0 -point *j405 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 100.06 -0.24 -122.58 -178.18 -85.82 179.03 N Force 2.03 -0.03 1.11 3 -33 30 Equilibrium Converged in 4 Iterations Event 12, Pitch Angle = -85.82 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- UP 296.0 279.047 GROUND 78.97 0.00 404.95 HOOK 80.15 0.04 125.78 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 1.3 0.0 -296.0 0 0 0 296 US401 JACKET 99.8 15.9 1.8 0 0 0 101 US403 JACKET 104.2 -16.6 1.9 0 0 0 106 US405 JACKET 91.3 0.0 -23.9 0 0 0 94 >&set stit = Lower to Mudline Lower to Mudline ================ +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 98.91 -0.45 -124.76 -177.28 -85.97 178.15 N Force 0.63 -0.08 0.68 0 -59 -33 Equilibrium Converged in 5 Iterations Event 13, Pitch Angle = -85.97 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- UP 293.3 281.171 GROUND 78.97 0.00 404.95 HOOK 79.66 0.09 123.66 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 0.7 0.1 -293.3 0 0 0 293 US401 JACKET 98.2 15.6 1.8 0 0 0 99 US403 JACKET 104.9 -16.7 1.9 0 0 0 106 US405 JACKET 89.6 -0.0 -23.5 0 0 0 93 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 98.30 -0.63 -128.90 -177.32 -86.02 178.22 N Force 0.27 0.13 0.28 0 -4 25 Equilibrium Converged in 5 Iterations Event 14, Pitch Angle = -86.02 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- UP 290.1 285.295 GROUND 78.97 0.00 404.95 HOOK 79.26 -0.12 119.53 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 0.3 -0.1 -290.1 0 0 0 290 US401 JACKET 97.6 15.5 1.7 0 0 0 99 US403 JACKET 102.7 -16.3 1.8 0 0 0 104 US405 JACKET 89.1 0.0 -23.4 0 0 0 92 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 98.43 -0.43 -135.03 -177.41 -86.03 178.34 N Force 0.17 -0.03 0.44 0 -45 -8 Equilibrium Converged in 4 Iterations Event 15, Pitch Angle = -86.03 +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- UP 285.1 291.418 GROUND 78.97 0.00 404.95 HOOK 79.42 0.04 113.41 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AUXLN GROUND 0.4 0.0 -285.1 0 0 0 285 US401 JACKET 95.9 15.2 1.7 0 0 0 97 US403 JACKET 101.7 -16.2 1.8 0 0 0 103 US405 JACKET 87.0 -0.0 -22.8 0 0 0 90 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is UPEND: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- JACKET Location 97.80 -0.52 -143.16 -177.34 -86.08 178.28 N Force 0.18 0.04 0.03 0 14 8 Equilibrium Converged in 5 Iterations >&subtitle >postpro +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ M A I N +++ =============== >structural +++ S T R U C T U R A L S O L U T I O N +++ ============================================= >&describe process sidelift >lcase -rao Time To Generate Load Cases : CP= 0.02 >lcase -process lift-1 1 Time To Generate Load Cases : CP= 0.00 >&describe process upend >lcase -process upend-3 3 Time To Generate Load Cases : CP= 0.02 >ssolve -nonlinear Reducing Stiffness of DEFAULT ============================= Time to Define Model Topology : CP= 0.03 Time to Complete Nodal Loads : CP= 0.00 Time to Define Stiffness Blocks : CP= 0.00 Time to Form Element Matricies : CP= 0.01 Time to Form Global Stiffness Matrix : CP= 0.00 Time to Form Global Load Matrix : CP= 0.00 Time to Factor Stiffness Matrix : CP= 0.00 Solving Residual Model ====================== Time to Define Model Topology : CP= 0.00 Load Case FRQMEANA Converged in 2 Iterations ============================================ Load Case RAOA001R Converged in 2 Iterations ============================================ Load Case RAOA001I Converged in 2 Iterations ============================================ Load Case RAOA002R Converged in 2 Iterations ============================================ Load Case RAOA002I Converged in 2 Iterations ============================================ Load Case RAOA003R Converged in 2 Iterations ============================================ Load Case RAOA003I Converged in 2 Iterations ============================================ Load Case RAOA004R Converged in 2 Iterations ============================================ Load Case RAOA004I Converged in 2 Iterations ============================================ Load Case RAOA005R Converged in 2 Iterations ============================================ Load Case RAOA005I Converged in 2 Iterations ============================================ Load Case RAOA006R Converged in 2 Iterations ============================================ Load Case RAOA006I Converged in 2 Iterations ============================================ Load Case RAOA007R Converged in 2 Iterations ============================================ Load Case RAOA007I Converged in 2 Iterations ============================================ Load Case LIFT-1 Converged in 2 Iterations ========================================== Load Case UPEND-3 Converged in 2 Iterations =========================================== Time to Solve Boundary Relations of DEFAULT : CP= 0.05 Expanding Results of DEFAULT ============================ Time For Backward Substitution : CP= 0.00 Time to Store Deflections : CP= 0.00 Time to Store Element Internal Loads : CP= 0.00 >end +++ M A I N +++ =============== >strpost +++ S T R U C T U R A L P O S T - P R O C E S S I N G +++ =========================================================== >&select :class -select @ -except ~'$'wa@ >cases -spectra sea >&select :load -select sea@ lift-1 upend-3 >restraint loads -class :class -load :load -detail >beam code -class :class -load :load -standard 1 1e10 0 1 -code api >joint code -class :class -load :load -standard 1 1e10 0 1 >end +++ M A I N +++ =============== MOSES Finished Normally ========================= CP Time 1.16 ======================== Total Units 1.16 ========================