WELCOME TO  MOSES Rev devlop
                         ============================
 
              This Program is licensed for the exclusive use of
 
                               Ultramarine inc.
 
              Copying of this program or use  by  anyone  other
              than  an  employee  of  the  above  firm  without
              written  consent  of  Ultramarine   is   strictly
                                 prohibited.
 
 
 
                               +++ M A I N +++
                               ===============
 
 
>&dimen -dim feet kips
>&device   -oecho no -g_default file -fig y  -auxin instl_d.dat
>&set launch         = .false.
>&set transportation = .false.
>&set loadout        = .false.
>&set upend          = .false.
>&set lift           = .true.
>inmodel -offset
 Loading File:
    /smb/software/devlop/ultra//hdesk/tools/install/macros/install.mac
                       Defining Deck with file deck.dat
                       ================================
 Setting Orientation
 Finished Defining Deck
    Time To perform Inmodel                         : CP=     0.28
>setup
 Defining Upending Tanks
 Deck Weight, CG  = 803 -5.50    6.80   50.70
 Deck Radii       =       22.00   27.40   31.40
 Deck Max Buoy.   =     183
    Time To Set Up                                  : CP=     0.18
>inst_lift
 Process LIFT|a,  Nominal Condition
    Time To Generate Load Cases                     : CP=     0.02
                        Reducing Stiffness of DEFAULT
                        =============================
    Time to Define Model Topology                   : CP=     0.01
    Time to Complete Nodal Loads                    : CP=     0.00
    Time to Define Stiffness Blocks                 : CP=     0.00
    Time to Form Element Matricies                  : CP=     0.01
    Time to Form Global Stiffness Matrix            : CP=     0.00
    Time to Form Global Load Matrix                 : CP=     0.00
    Time to Factor Stiffness Matrix                 : CP=     0.00
                         Expanding Results of DEFAULT
                         ============================
    Time For Backward Substitution                  : CP=     0.01
    Time to Store Deflections                       : CP=     0.00
    Time to Store Element Internal Loads            : CP=     0.00
                       Setting Up Post-Processing Cases
                       ================================
    Time To Setup Cases                             : CP=     0.01
>inst_spost
    Time to Check lift Sling Elements               : CP=     0.01
    Time To Report Restraints                       : CP=     0.00
    Time For Code Check                             : CP=     0.01
    Time For Beam Loads                             : CP=     0.01
    Time For Plate Loads                            : CP=     0.00
    Time For Joint Punching & Crushing              : CP=     0.00
>i_finish
 
 
                          MOSES   Finished Normally
                          =========================
                           CP Time             0.69
                           ========================
                           Total Units         0.69
                           ========================