WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&device -g_default file -oecho n >&dimen -dimen feet kips >&title 8 Pile Jacket * Pile Docking * TDOM -RESET METHOD * >inmodel Time To perform Inmodel : CP= 0.11 >&dcptime Time to read model Time to read model : CP= 0.00 >&set time = 20 1.0 >&set imptime = 8 >&set imptste = .1 >&instate -locate jacket 0 0 -2000 >&set jktbuoy = 6532.677 >&set bumar = 1.894629 >&instate -locate jacket 0 0 0 >&weight -total jacket 10913 -1.573 -.878 -235.728 135.679 143.317 86.235 >&apply -fraction -category str_model #buoy 1.894629 >&summary +++ & S U M M A R Y +++ ======================= >&rep_sel -part jacket >categ >&rep_sel -part barge >categ >&rep_sel -selall >end +++ M A I N +++ =============== >&instate -locate barge 0 0 -19 0 0 0 -locate jacket 570 0 40 0 0 180 >&weight -compute barge 15 41 131 131 >MEDIT +++ M O D E L E D I T I N G +++ ================================= >&describe body barge >*bsa 450 64 25 >*bpa 450 -64 25 >*bpf 0 -64 25 >*bsf 0 64 25 >*btip 570 0 30-19+300 >*bpc 425 -15 30 >*bsc 425 15 30 >~crane tube 20 1 >beam ~crane -nuse @ -use #buoy *btip *bpc >beam ~crane -nuse @ -use #buoy *btip *bsc >~WIRE b_cat 3.0 -depanc 386 -len 4000 -buoydia 0 -wtplen .0125 >CONNECTOR bpa_1 ~WIRE *bpa -ANC -45 20 >CONNECTOR bpa_2 ~WIRE *bpa -ANC -90 20 >CONNECTOR bpf_1 ~WIRE *bpf -ANC -90 20 >CONNECTOR bpf_2 ~WIRE *bpf -ANC -135 20 >CONNECTOR bsf_1 ~WIRE *bsf -ANC 135 20 >CONNECTOR bsf_2 ~WIRE *bsf -ANC 90 20 >CONNECTOR bsa_1 ~WIRE *bsa -ANC 90 20 >CONNECTOR bsa_2 ~WIRE *bsa -ANC 45 20 >~hoist sling 20 -length 400 >~sling sling 4 -length 100 >connector boom ~hoist *btip >connector sl1381 ~sling *j1381 >connector sl1401 ~sling *j1401 >connector sl1389 ~sling *j1389 >connector sl1409 ~sling *j1409 >t-h boom sl1381 sl1401 sl1389 sl1409 -initial >&set nodecor = 630 -21.25 -334 >&set nodeX = 630 >&set nodeY = -21.25 >&set nodeZ = -334 >&describe -part ground >*pile_X -3000+630 -21.25 -334 >*pile_Y 630 3000+-21.25 -334 >&set len_X = 3000 >&set len_Y = 3000 >&set py = 0 0, 5 2/12 10 4/12, 15 7/12, 20 10/12, 25 \ 12.5/12, 30 15/12 35 18.5/12, 40 22/12, 45 26/12, 50 30/12, \ 55 34/12 60 38/12, 65 42.5/12, 70 48/12, 75 52/12, 80 58/12 85 \ 63/12, 90 69/12 >~pile_X sl_elem 1.1284*12 -len 3000 -emodulus 1e10 -x_py 0 0, 5 2/12 \ 10 4/12, 15 7/12, 20 10/12, 25 12.5/12, 30 15/12 35 18.5/12, \ 40 22/12, 45 26/12, 50 30/12, 55 34/12 60 38/12, 65 42.5/12, \ 70 48/12, 75 52/12, 80 58/12 85 63/12, 90 69/12 >~pile_Y sl_elem 1.1284*12 -len 3000 -emodulus 1e10 -x_py 0 0, 5 2/12 \ 10 4/12, 15 7/12, 20 10/12, 25 12.5/12, 30 15/12 35 18.5/12, \ 40 22/12, 45 26/12, 50 30/12, 55 34/12 60 38/12, 65 42.5/12, \ 70 48/12, 75 52/12, 80 58/12 85 63/12, 90 69/12 >connector pile_X ~pile_X *j152 *pile_x >connector pile_Y ~pile_Y *j152 *pile_Y >END +++ M A I N +++ =============== >&connector pile@ -inactive bp@ bs@ -A_TENSION 210 Setting Activity Of PILE_X To Inactive ======================================== Setting Activity Of PILE_Y To Inactive ======================================== Moving Attachment of Connector BPA_1 ==================================== Moving Attachment of Connector BPA_2 ==================================== Moving Attachment of Connector BPF_1 ==================================== Moving Attachment of Connector BPF_2 ==================================== Moving Attachment of Connector BSA_1 ==================================== Moving Attachment of Connector BSA_2 ==================================== Moving Attachment of Connector BSF_1 ==================================== Moving Attachment of Connector BSF_2 ==================================== >&dcptime Time to Connect Time to Connect : CP= 0.06 >&compartment -percent legB@ 70 legc@ 100 >&weight -compute barge 15 41 131 131 >&picture iso >&picture iso -x -100 700 -y -200 200 >&picture side >&picture top >hydrodynamics +++ H Y D R O _ D Y N A M I C S +++ =================================== >g_press barge Setting Pressure Name for BARGE to BARGE ======================================== Time for Strip Theory For BARGE : CP= 0.09 Setting Drift Name for BARGE to BARGE ===================================== Time to Sum Pressures For 150 Panels on BARGE : CP= 0.03 Time To Set Up Convolution For NONE : CP= 0.02 >end_hydrodynamics +++ M A I N +++ =============== >&data environment +++ & D A T A +++ ================= >c_profile nemba 0 0.52*1.689 386 0.26*1.689 >environment swell1 -sea issc 180-18 4.10 10.0/1.2958 -time 20 1.0 -wind \ 10 180+10 -current nemba 180+10 -depth 386 -use_mean y >environment swell2 -sea issc 180-45 4.10 10.0/1.2958 -time 20 1.0 -wind \ 10 180+10 -current nemba 180+10 -depth 386 -use_mean y >environment swell3 -sea issc 180 4.10 10.0/1.2958 -time 20 1.0 -wind \ 10 180+10 -current nemba 180+10 -depth 386 -use_mean y >end_&data +++ M A I N +++ =============== >&env swell1 >&equi -omega .2 +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- BARGE Location 0.48 -0.23 -17.64 -0.04 0.44 0.06 N Force 1.49 -0.78 -0.48 4 27 -242 JACKET Location 572.74 0.48 36.84 0.57 -0.52 180.00 N Force -0.77 6.89 0.48 1735 -222 0 Equilibrium Converged in 12 Iterations >&status tip-hook +++ T I P - H O O K P R O P E R T I E S +++ ============================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global Coordinates Length of /------------ Connection -------------/ Boom Load Line Body X Y Z -------- --------- ---------- -------- --------- --------- --------- &BOOM 1365.0 148.325 BARGE 572.86 0.57 288.96 HOOK 573.68 1.51 140.50 >&status force -hard >&status f_connect -hard >&set jktloc = 572.7404 0.4817433 36.83629 0.5666805 -0.5218861 179.9989 >&set brgloc = 0.4835783 -0.2297669 -17.64359 -4.156806E-2 0.4414255 \ 5.765355E-2 >&set jktxor = 572.7404 >&set jktyor = 0.4817433 >&set jktzor = 36.83629 >&set jktrzor = 179.9989 >&set brgzor = -17.64359 >&subtitle Before Impact >tdom -newmark Time To Set Up Convolution For BARGE : CP= 0.02 Saving Database at Time = 1.000 ================================== Saving Database at Time = 2.000 ================================== Saving Database at Time = 3.000 ================================== Saving Database at Time = 4.000 ================================== Saving Database at Time = 5.000 ================================== Saving Database at Time = 6.000 ================================== Saving Database at Time = 7.000 ================================== Saving Database at Time = 8.000 ================================== Saving Database at Time = 9.000 ================================== Saving Database at Time = 10.000 ================================== Saving Database at Time = 11.000 ================================== Saving Database at Time = 12.000 ================================== Saving Database at Time = 13.000 ================================== Saving Database at Time = 14.000 ================================== Saving Database at Time = 15.000 ================================== Saving Database at Time = 16.000 ================================== Saving Database at Time = 17.000 ================================== Saving Database at Time = 18.000 ================================== Saving Database at Time = 19.000 ================================== Simulation Terminated at Specified Time ======================================= Time For Time Domain : CP= 0.21 >&describe interest -associate *j152 >prcpost +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >&set l = Ft >&set v = Ft/Sec >&set f = Kips >points *j152 +++ D I S P O S I T I O N +++ ============================= >vlist The Variables Available for Selection are: ========================================== 1 Event 13 V-RX:*J152 24 M-X:*J152 2 W.Elv:*J152 14 V-RY:*J152 25 M-Y:*J152 3 Clear:*J152 15 V-RZ:*J152 26 M-Z:*J152 4 L-X:*J152 16 V-Mag:*J152 27 M-Mag:*J152 5 L-Y:*J152 17 A-X:*J152 28 G-X:*J152 6 L-Z:*J152 18 A-Y:*J152 29 G-Y:*J152 7 L-RX:*J152 19 A-Z:*J152 30 G-Z:*J152 8 L-RY:*J152 20 A-RX:*J152 31 RV-X:*J152 9 L-RZ:*J152 21 A-RY:*J152 32 RV-Y:*J152 10 V-X:*J152 22 A-RZ:*J152 33 RV-Z:*J152 11 V-Y:*J152 23 A-Mag:*J152 34 RV-Mag:*J152 12 V-Z:*J152 >add_column V-XY -norm 10 2 >vlist The Variables Available for Selection are: ========================================== 1 Event 13 V-RX:*J152 25 M-Y:*J152 2 W.Elv:*J152 14 V-RY:*J152 26 M-Z:*J152 3 Clear:*J152 15 V-RZ:*J152 27 M-Mag:*J152 4 L-X:*J152 16 V-Mag:*J152 28 G-X:*J152 5 L-Y:*J152 17 A-X:*J152 29 G-Y:*J152 6 L-Z:*J152 18 A-Y:*J152 30 G-Z:*J152 7 L-RX:*J152 19 A-Z:*J152 31 RV-X:*J152 8 L-RY:*J152 20 A-RX:*J152 32 RV-Y:*J152 9 L-RZ:*J152 21 A-RY:*J152 33 RV-Z:*J152 10 V-X:*J152 22 A-RZ:*J152 34 RV-Mag:*J152 11 V-Y:*J152 23 A-Mag:*J152 35 V-XY 12 V-Z:*J152 24 M-X:*J152 >plot 1 4 -rax 5 -no_edit >plot 1 10 11 35 -no_edit -t_x 'Time, Sec' -t_left 'Lateral Velocity of Jkt \ Point, Ft/Sec' >plot 1 12 -no_edit -t_x 'Time, Sec' -t_left 'Vertical Velocity of Jkt \ Point, Ft/Sec' >statistic 1 4 5 6 27 -hard >statistic 1 10 11 12 34 -hard >extreme 1 10 11 12 34 -hard >set_variable maxtime -max 1 35 >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >cf_magnitude +++ D I S P O S I T I O N +++ ============================= >report >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >trajectory +++ D I S P O S I T I O N +++ ============================= >report location velocity >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >end +++ M A I N +++ =============== >&subtitle After Impact >&instate -event 12 >&env swell1 -sea issc 180-45 4.10 10.0/1.2958 -time 12+8 .1 -wind 10 180+10 \ -current nemba 180+10 -depth 386 -use_mean y >&connector pile@ -active -l_tension 0 Setting Activity Of PILE_X To Active ====================================== Setting Activity Of PILE_Y To Active ====================================== Changing Length of Connector PILE_X =================================== Changing Length of Connector PILE_Y =================================== >&status g_connector +++ C O N N E C T O R G E O M E T R Y +++ =========================================== Results in The Body System Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Length of /------------ Connection -------------/ Name Class Status First Seg. Body X Y Z -------- -------- -------- ---------- -------- --------- ---------- --------- &BOOM ~SLING Active Assembly BOOM ~HOIST Active 148.32 BARGE 570.00 0.00 311.00 GROUND 573.32 1.44 139.77 BPA_1 ~WIRE Active 4000.00 BARGE 450.00 -64.00 25.00 GROUND 3261.17 -2875.17 -386.00 BPA_2 ~WIRE Active 4000.00 BARGE 450.00 -64.00 25.00 GROUND 450.00 -4039.59 -386.00 BPF_1 ~WIRE Active 4000.00 BARGE 0.00 -64.00 25.00 GROUND -0.00 -4039.59 -386.00 BPF_2 ~WIRE Active 4000.00 BARGE 0.00 -64.00 25.00 GROUND -2811.17 -2875.17 -386.00 BSA_1 ~WIRE Active 4000.00 BARGE 450.00 64.00 25.00 GROUND 450.00 4039.59 -386.00 BSA_2 ~WIRE Active 4000.00 BARGE 450.00 64.00 25.00 GROUND 3261.17 2875.17 -386.00 BSF_1 ~WIRE Active 4000.00 BARGE 0.00 64.00 25.00 GROUND -2811.17 2875.17 -386.00 BSF_2 ~WIRE Active 4000.00 BARGE 0.00 64.00 25.00 GROUND -0.00 4039.59 -386.00 PILE_X ~PILE_X Active 2999.53 JACKET -60.00 21.25 -374.00 GROUND -2370.00 -21.25 -334.00 PILE_Y ~PILE_Y Active 3004.00 JACKET -60.00 21.25 -374.00 GROUND 630.00 2978.75 -334.00 SL1381 ~SLING Active 100.00 JACKET -30.00 26.38 12.00 GROUND 573.32 1.44 139.77 SL1389 ~SLING Active 100.00 JACKET -30.00 -26.38 12.00 GROUND 573.32 1.44 139.77 SL1401 ~SLING Active 100.00 JACKET 30.00 26.38 12.00 GROUND 573.32 1.44 139.77 SL1409 ~SLING Active 100.00 JACKET 30.00 -26.38 12.00 GROUND 573.32 1.44 139.77 >&status f_connector +++ C O N N E C T O R F O R C E S +++ ======================================= Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- BOOM BARGE 17.8 6.0 -1409.2 0 0 0 1409 BPA_1 BARGE 144.9 -145.2 -40.7 0 0 0 209 BPA_2 BARGE -0.0 -209.3 -42.4 0 0 0 214 BPF_1 BARGE 0.0 -203.5 -46.5 0 0 0 209 BPF_2 BARGE -146.3 -146.1 -48.3 0 0 0 212 BSA_1 BARGE 0.8 195.3 -41.3 0 0 0 200 BSA_2 BARGE 140.0 139.0 -40.2 0 0 0 201 BSF_1 BARGE -147.9 148.9 -48.9 0 0 0 216 BSF_2 BARGE 0.9 211.0 -47.6 0 0 0 216 PILE_X JACKET 0.0 0.0 0.0 0 0 0 0 PILE_Y JACKET 0.0 0.0 0.0 0 0 0 0 SL1381 JACKET 112.7 -99.1 344.4 0 0 0 376 SL1389 JACKET 125.7 110.5 384.1 0 0 0 419 SL1401 JACKET -104.9 -92.2 320.4 0 0 0 350 SL1409 JACKET -117.8 103.6 360.1 0 0 0 393 len_X = 2999.535 len_Y = 3004.001 >tdom -newmark -reset 12 Time To Set Up Convolution For BARGE : CP= 0.02 Saving Database at Time = 12.900 ================================== Saving Database at Time = 13.900 ================================== Saving Database at Time = 14.900 ================================== Saving Database at Time = 15.900 ================================== Saving Database at Time = 16.900 ================================== Saving Database at Time = 17.900 ================================== Saving Database at Time = 18.900 ================================== Saving Database at Time = 19.900 ================================== Simulation Terminated at Specified Time ======================================= Time For Time Domain : CP= 0.51 >prcpost +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >cf_magnitude pile@ -event 12 12+8 +++ D I S P O S I T I O N +++ ============================= >add_column pile_xy -rms 2 4 >vlist The Variables Available for Selection are: ========================================== 1 Event 3 RATIO:PILE_X 5 RATIO:PILE_Y 2 MAG:PILE_X 4 MAG:PILE_Y 6 PILE_XY >plot 1 2 4 6 -no -t_x 'Time, Sec' -t_left 'Force in Pile, Kips' >extreme 1 2 4 6 -hard >statistic 1 2 4 6 -hard >report >end +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== >end +++ M A I N +++ =============== MOSES Finished Normally ========================= CP Time 1.24 ======================== Total Units 1.24 ========================