By loadout, we mean the process of moving a structure from a set of skidways on the land to a cargo barge. Normally, the barge is placed some fixed distance away from the land skidway and the structure is skidded along the land skid. At some point, part of the structure will cantilever over the gap between the barge and the land. The structure is moved further until part of it is over the barge. At this time, the barge ballast is changed so that the barge partially supports the structure. Now, the structure is skidded further off of the land and onto the barge. Throughout this process two things are important:

• The ballast in the barge, and
• The stresses in the structure.

Instead of considering the problem as a single difficult one, it is normally separated into two problems:

• Analyze the structure with a set of stiff supports which model the barge skidways, the land skidways and the gap between the two.
• Design a barge ballast plan for the loadout so that the barge has zero deflection when the reactions of the first analysis are applied to it. The barge ballast condition must be computed for quite a few intermediate positions between when the barge first picks up load, and when the structure in completely on the barge.