A_SEA:

This example shows how to use the -A_SEA option of &ENV. There are six environments defined: HEADB, HEADL, HEADC, HEADA, BEAMB AND HEADBEAM. All have the same period, and the first four are head seas, BEAMB is a beam sea and HEADBEAM is obtained using -a_sea to combine HEADL and BEAMB. HEADC has a height that is the square root of the sum or the squares of the HEADB and HEADL. The HEADA is defined as the "sum" of the first two; i.e. it has a -sea which is the first and -a_sea which is the second.

This test demonstrates that the results for cargo force statistics and beam loads are the same for HEADA and HEADC. Also the resutls for headc are the the rms of those for HEADL and HEADB. It also shows that the wave drift forces of the "A" cases are the same as the sum of the drift forces the the base cases.

• a_sea commands
• a_sea data
• a_sea log
• a_sea output

BUILDG:

This example shows how to use the &BUILDG menu to input a set of data to MOSES for "DISPOSITION".

• buildg commands
• buildg data
• buildg log
• buildg output

INT_MEN:

This examples shows how to use some of the internal menus.

• int_men commands
• int_men log
• int_men output

C_RARM:

This shows how to compute a righting arm curve for a body with connectors.

• c_rarm data
• c_rarm commands
• c_rarm log
• c_rarm output

CONE:

This test shows how to define a non-prismatic "cone" member.

• cone commands
• cone data
• cone log
• cone output

DECK_FOVER:

This test performs a float over analysis of a deck mating with a fixed offshore platform using GSPR connector elements.

• deck_fover commands
• deck_fover data
• deck_fover log
• deck_fover output

FILE:

This examples shows how to use the &file command.

• file commands
• file data
• file log
• file output

LOOP:

This sample shows how to use loops and the Disposition Menu to get the maximum G load over several cases.

• loop commands
• loop data
• loop log
• loop output

LSET:

This shows how to define load sets and how to apply it. Two load sets are defined and applied at 100 percent separately.

• lset commands
• lset data
• lset log
• lset output

LSET_TIM:

This shows how to define load sets which vary in the time domain.

• lset_tim commands
• lset_tim data
• lset_tim log
• lset_tim output

MG_BUILD:

This examples shows how to "gather" curves and combine them on a single plot. The particular data used are the values of spectra for different peak periods.

• mg_build commands
• mg_build data
• mg_build log
• mg_build output

RINGS:

This example shows how to automatically resize using hydrostatic rings at various ring spacing.

• rings commands
• rings data
• rings log
• rings output

RP2SK:

This is an example of how to use MOSES to comply with the combination rules of RP2SK.

• rp2sk commands
• rp2sk data
• rp2sk log
• rp2sk output

TANK_CAP:

This sample shows how to compute tank capacities via the TANK_CAPACITY command and how to define a sounding tube.

• tank_cap commands
• tank_cap data
• tank_cap log
• tank_cap output

TAPER:

This is a test of generating a "pyramid" using a non-prismatic beam.

• taper commands
• taper data
• taper log
• taper output

WIND:

This test shows how to define a wind history.

• wind commands
• wind data
• wind log
• wind output