Printer Friendly Security-Network Questions

Printer Friendly Security-Network Questions Security-Network Questions

Q: What do I do to convert to "network security"?

A: Go to the machine on which MOSES installed, get a cmd prompt, and issue the following commands:

    ipconfig/all >cow

This will create a file, cow, which contains all of the information we need to convert you to network security. Finally, email us the file.

Q: Why am I getting a message "MOSES Will Expire in 18 Days" when I have a perpetual lease?

A: Notice that you also got message that "No Valid Ethernet address found". With REV 7.01 and later MOSES will let you go for 30 days after the last "validation" before it cuts you off if you have unlimited users. This way you can be away from the office without needing a key.

Q: Why does MOSES runs nicely on several machines but on one I get the message "*** WARNING: No Valid Ethernet Address Found", "Will Check for Key"?

A: The network security that MOSES employs works as follows:

You supply a set of IP / Ethernet Address pairs and MOSES stores the IP address for the server in a file, /ultra/data/site/server.

When a run is initialized, MOSES reads this file and executes a APR inquiry for the Ethernet address of each machine with a specified IP address. The results are compared with the set of Ethernet address you originally supplied to see if one of the the machines exists.

It is IMPORTANT to know that ARP will only work for machines within a subnet. Thus if MOSES gives you the message:

       Invalid Ethernet Address
       Will Check For Key

You are trying to use MOSES on a subnet for which you have not submitted a valid IP / Ethernet Address pair within the subnet. For MOSES revisions 7.01 and newer you can find out all of the information about your installation by issuing the command

     &STATUS SECURITY

from inside MOSES.

Q: Why do I get an message "*** WARNING: No Valid Ethernet Address Found", "Will Check for Key"?

A: You have a version which is set up to run in a network without a hardware key, but you have not performed the necessary configuration so that the check can be made. What this means is that, under these circumstances, MOSES must have a key installed. If you have a key, you can eliminate this message by deleting the file, /path/ultra/data/site/server. Here, /path is the path to where MOSES is installed. If you do not have a key, you must follow the instructions on security in the MAINTAIN page.

Ultramarine, Inc. | Suite 325 | 3100 S. Gessner | Houston, Texas 77063 | (713)975-8146

Site Map

Copyright(C) 1996-2008 Ultramarine,Inc.